GB - 11
CHECKLIST
Please complete the following checklist before
proceeding:
❑
All assembly instructions have been
completed.
❑
No remaining loose parts in carton.
❑
Handlebar is adjusted comfortably and
tightened securely.
While learning how to use your unit, pay
extra attention to the following important
items:
❑
Fill fuel tank with proper gasoline/oil mix.
❑
Become familiar with all controls – their
location and function.
❑
Be certain that all hardware is properly
tightened.
CONTROLS AND FEATURES
Refer to Figure 1 for controls and features
locations.
Ignition Switch
The ignition switch is operated with a
removable key that has two positions.
"STOP" Position: Ignition
system is shut down.
"RUN" Position: All controls
are operable.
To start the engine, the key
must be in the "RUN" position.
To stop the engine, turn the
key to the "STOP" position.
Auger
When handlebar is lifted so auger contacts the
ground, auger propels unit forward while
collecting snow. Forward speed will vary
according to depth and moisture content.
Auger Clutch Bail
Squeeze the auger
clutch bail against the
handlebar to engage
auger.
Release bail to
disengage and brake
auger.
IMPORTANT:
Check auger to be sure it is not
frozen. If belt squeals when clutch bail is
engaged, auger is frozen. Immediately release
the clutch bail and move the unit to a heated
area to thaw.
OPERATION
WARNING:
ACCIDENTAL
ENGINE START UP or
UNAUTHORIZED USE could
result in death or serious injury.
ALWAYS shut off unit and
remove key before servicing or
leaving unit unattended.
WARNING:
THROWN
OBJECTS could cause personal
injury and/or property damage.
ALWAYS discharge in a safe
direction. Disengage auger
when unit is traveling to work
area or is not in use. Use
extreme caution when operating
on or crossing gravel surfaces.
STOP
RUN
OS1680
CAUTION:
STRIKING
FOREIGN OBJECTS may
damage unit and result in minor
or moderate injury. Shut off unit
and engine. Check for any
damage or loose parts and
repair before restart.
WARNING:
IMPROPER
ADJUSTMENT could result in
death or serious injury. AUGER
BRAKE MUST DISENGAGE
when clutch is engaged. BRAKE
MUST STOP AUGER WITHIN 5
SECONDS of releasing auger
clutch bail.
Engaged
Disengaged
OS1560
