13
OPERATION
Fig. 3.
l
Do not operate the lever 2 (Fig. 3) for the
choke as shown in. If necessary move the
lever (2) to middle position according to the
engine temperature resp. the ambient
temperature.
Cold engine or cold ambient
temperature
Fig. 4
l
Push the lever 2 (Fig. 4) for the choke in
direction of arrow to the end stop and close
the choke.
i Note
The choke is in operating position when it is not
operated.
Starting the engine
Fig. 5
l
Turn the ignition switch 3 (Fig. 5) to
position "ON".
Fig. 6
l
Pull the starter handle (Fig. 6) lightly until
resistance is noticed (compression), then
pull the starter handle with force. Do not
pull it completely out.
l
Guide the starter rope back by hand.
i Note
Do not let the starter handle hit back against the
engine.
l
Repeat the starting procedure if the engine
does not start at the first time.
l
If the engine is cold close the choke again
and repeat the starting procedure.
Fig. 7
l
Open the lever 2 (Fig. 7) of the choke in
direction of arrow once the engine has
warmed up.
l
Let the engine warm up for 1-2 minutes.
2
2
