7
SAFETY INFORMATION
1.8 Loading the machine
Use only strong and stable loading ramps. The ramp inclination must be lower than the gradability of
the machine.
Secure the machine against turning over or slipping off.
Secure the machine on the transport vehicle against rolling, slipping and turning over.
Persons are highly endangered when
l
stepping or standing under loads being lifted
l
they remain in the drive range of the machine during an ongoing demonstration and during
loading.
The machine must not swing about when being lifted.
Secure the machine on the transport vehicle against rolling, slipping and turning over.
1.9 Starting the machine
Before starting
Familiarize yourself with the equipment, the control elements, the working principles of the machine
and the area where you will be working.
Use your protective outfit (hard hat, safety boots etc.).
l
Check before starting the machine whether:
l
persons or obstacles are beside or under the machine
l
the machine is free of oily and combustible material
l
all handles are free of grease, oils, fuels , dirt, snow and ice
l
the machine shows any obvious faults
l
all guards and protective devices are properly fastened
l
steering, brakes and control elements are in good working order.
Do not start the machine if any gauges, control lights or control elements are defective.
Do not take any loose objects with you or secure them to the machine.
Use only machines that have been properly serviced according to schedule.
Starting
l
Take a correct position to the machine to start the engine and hold the crank handle correctly.
l
Do not use any starting aids such as Start Pilot or ether.
Starting in closed rooms
Exhaust fumes are highly dangerous! Always ensure an adequate supply of fresh air when starting in
closed rooms!
