Z1
Wedge
ext.
Preload
SPRING CHANGE
FIG. 1
Unscrew the caps
(4)
with a 21 mm socket
wrench.
Remove the caps complete with O-ring
(5)
from the stanchions.
FIG. 2
Push the stanchions into the sliders and
remove the lower washer
(33)
and the
spring
(8)
from each fork leg.
Drain all oil from the fork legs.
WARNING:
Remember to always
recycle any used oil.
To change the fork leg oil follow the proce-
dure as described in section “REASSEM-
BLY” from Fig. 22 to Fig. 24.
PILOT BUSHING AND SEAL
ASSEMBLY CHANGE
FIG. 3
Turn the fork leg upside-down and unscrew
the foot nuts
(22)
by the use of a 15 mm
socket wrench.
4
5
8
33
22
