Z1
Wedge
ext.
Preload
FIG. 15
Insert the stop ring
(16)
into the slider
making sure it is properly seated into place.
Use buffer
(B)
to properly seat the ring into
the slider.
FIG. 16
Lubricate the dust seals
(15)
and fit them
into the stanchions from the spring end.
VALVE AND PUMPING ROD
ASSEMBLY
FIG. 17
After having overhauled or replaced the
valve unit and after having cleaned the
inside of the tube, reassemble. Assemble
valve components, in correct sequence:
washer
(12)
,
valve
(29)
and pocket
(30)
.
Then fit pumping rod
(10)
with seal ring
(9)
and rebound spring
(11)
into the valve
assembly.
16
15
10
12
29
30
11
9