Z1
Wedge
ext.
Preload
FIG. 21
Screw the foot nut
(22)
onto the pumping
rod threaded end
(10)
.
Tighten to 11 Nm.
Check to verify that the stanchions slide
properly through the stroke by pumping
them up and down several times.
HOW TO FILL WITH OIL
FIG. 22
Pour oil little by little when the stanchions
are fully down and then pump with the
crown so as to have a better filling.
Check that the oil level
(H)
is as required in
both legs.
SPRING AND CAP
FIG. 23
Fit the spring
(8)
and lower washer
(33)
into each stanchion tube.
22
Nm
11
H
Travel
(mm)
H
(mm)
110
60
130
60
8
33
