TANGO Desktop
Safety
Märzhäuser Sensotech GmbH
7
Ensure that no chips, liquids or other objects can get into the housing of the controller
or the power supply. Protect the controller and the power supply from dirt and dust as
far as possible.
The controller and accessories are not protected against corrosive, infectious,
radioactive or other substances which are harmful to health. When handling such
substances, ensure that all legal requirements are fulfilled, especially the national
regulations on accident prevention.
Ensure that the controller, in conjunction with your application, meets the applicable
safety regulations and legal requirements.
This controller was developed and manufactured in compliance with the standard
DIN
EN 61010-1:2011-07 Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 1: General requirements
.
Note that the effective motor voltage value can correspond to the DC voltage at the
plug
24V DC/4A max.
.
In the event of malfunction, faults or safety risks related to the controller or the power
supply, switch off all the devices concerned and disconnect them from the mains
supply by removing all plugs, for example. Secure the devices concerned to prevent
them being switched back on again and contact our Customer Service Center.
The controller can become damaged if ventilation is prevented. Set the controller down
on a firm, level surface. Keep other objects at least 1.5 cm away on all sides. Do not
place any objects on the controller. When the mounting plate is used, the controller
must not be fixed to thermally insulating bodies (e.g. made of plastic).
Disconnect the controller from the voltage supply before you connect a PC or other
peripheral devices to the controller or disconnect them from the controller.
An improper load or violent treatment of the control stick can lead to incertitudes and
damage to the joystick. Protect the joystick from falling, impact and forced deflection.
Do not store the joystick with the bottom facing upwards.
