Marzhauser Sensotech TANGO 3 mini, Operating Manual

Page: 27 / 34

TANGO Desktop Accessories
Märzhäuser Sensotech GmbH 27
Functional scope
On delivery, the operating elements of the ERGODRIVE are configured as follows:
Operating element Assigned function
1
F1 key
2
No assignment
XY-key
2
Switch over XY-travel speed
Value 1 (preset):
1.0 mm/rev
Value 2: 14.0 mm/rev
Z-key 2,3
Switch over Z-travel speed
Value 1 (preset):
0.1 mm/rev
Value 2: 1.0 mm/rev
X-drive knob Move X-axis (axis 1)
Y-drive knob Move Y-axis (axis 2)
Z-wheel Move Z-axis (axis 3)
1 Factory setting, functions can be configured individually, see SwitchBoard operating manual or TANGO instruction set
2 On both sides of the ERGODRIVE
3 Only on ERGODRIVE 3 digital
Configuration options
There is a multitude of configuration options for the ERGODRIVE using SwitchBoard or manual
programming of the controller. The states of drive knobs, Z-wheel and function keys can be queried via the
software interface or be evaluated by the controller.
Configuration options for the ERGODRIVE (excerpt):

Individual configuration of travel speeds

Move X/Y-axis synchronously using X-drive knob

Configure Z-wheel assignment (any axis, LED 100)

Enable/disable toggle mode for XY/Z-key

Configure F1 key (Snapshot, LED 100)

Read out states of all function keys

Enable/disable ERGODRIVE
You will find detailed information about the ERGODRIVE configuration in the following documents:

The Instruction Set of the TANGO Controller

Operating Manual SwitchBoard
Technical data
ERGODRIVE 2 digital ERGODRIVE 3 digital
Art. no. 00-27-322-7000 00-27-322-8000
No. of axes 2 3
Dimensions 139 × 170 × 188 mm 139 × 170 × 188 mm
Weight Approx. 1.5 kg Approx. 1.6 kg
Interface TANGO HDI digital
Material Aluminium, anodised and lacquered black (housing), membrane keyboard (control panel)