Spark Arrester
A
WARNING
POTENTIAL HAZARD
• Muffler surface becomes hot when
Trimmer/Brushcutter is in operation
and remains hot for some time after the
engine is shut off.
WHAT CAN HAPPEN
• Contact with hot muffler surfaces could
cause a burn.
HOW TO AVOID TIIE HAZARD
• Make sure the muffler is cool before
inspecting and cleaning the spark
arrester.
Maintenance Interval
• The spark arrester should be inspected and
cleaned after every 25 hours of use.
Replace the screen if it cannot be thoroughly
cleaned, or if it is damaged.
Spark Arrester Maintenance
1.
With the engine at ambient (room) temperature,
loosen the knob and remove the air cleaner cover.
2.
Loosen the knob and lift off the cylinder cover.
3.
Remove the two socket head screws holding the
spark arrester assembly to the muffler.
[Model: BC2300]
Tail
Socket Head Screw (2)
Spark Arrester
[Models: BC2600, BC3200, BC2600H, BC3200H]
--<"'<'1/_,A..,., �
\�
'-.socket Head Screw {5)
Spark.Arrester
<I-. Remove and clean the tail, gasket and spark
arrester with a safety solvent and a stiff brush. If
any part cannot be thoroughly cleaned, it must be
replaced.
5.
Reinstall the spark arrester, gasket and tail onto
the muffler, then reinstall and tighten the two
socket head screws.
6.
Reinstall the cylinder and air cleaner covers.
-24-
