RDM
27
RDM
The MAC III AirFX can communicate using RDM (Remote Device Management) in accordance with ESTA’s
American National Standard E1.20
.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open standard
for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely
affecting existing non-RDM equipment. The RDM protocol allows a console or dedicated RDM controller to
send commands to and receive messages from specific fixtures.
RDM ID
Each MAC III AirFX has an RDM UID that makes it uniquely addressable. This can be found in the control
panel menus under
FIXTURE INFORMATION
.
RDM UID
shows the fixture’s factory-set unique ID for
identification in RDM systems.
RDM communication
The MAC III AirFX will respond to:
1. ”MAC III AirFX supported standard commands”; see page 28.
2. ”MAC III AirFX supported manufacturer specific commands”; see page 29.
Summary of Contents for MAC III AirFX
Page 1: ...MAC III AirFX USER MANUAL...
Page 62: ......
Page 63: ......
Page 64: ...www martin com Olof Palmes All 18 8200 Aarhus N Denmark Tel 45 8740 0000 Fax 45 8740 0010...