Martin Engineering M3786-03/19
2
Martin
®
Modular Slider Cradle
Before Installing Slider Cradle
IMPORTANT
The delivery service is responsible for damage occurring in
transit. Martin Engineering CANNOT enter claims for
damages. Contact your transportation agent for more
information.
1. Inspect shipping container for damage. Report damage to delivery service
immediately and fill out delivery service’s claim form. Keep any damaged
goods subject to examination.
2. Remove Martin
®
Modular Slider Cradle from shipping container.
Equipment in container should include the following:
•
Martin
®
Modular Slider Cradle Assembly.
•
Two Conveyor Products Warning Labels, P/N 23395.
3. If anything is missing, contact Martin Engineering or representative.
WARNING
!
Before installing equipment, turn off and lock out/tag out
energy source to conveyor and conveyor accessories.
4. Turn off and lock out/tag out energy source according to ANSI standards
(see “References”).
WARNING
!
If equipment will be installed in an enclosed area, gas level or
dust content must be tested before using a cutting torch or
welding. Using a cutting torch or welding in an area with gas
or dust may cause an explosion.
5. If using a cutting torch or welding, test atmosphere for gas level or dust
content. Cover conveyor belt with fire-retardant cover.
6. If not already present, install an impact idler 1 in. (25 mm) ahead of and
1 in. (25 mm) behind cradle’s location. Make sure idlers are straight and
centered under conveyor belt.
7. Remove any unnecessary idlers.
Before Installation
Summary of Contents for M3786
Page 14: ......