Martin Engineering M3786-03/19
8
Martin
®
Modular Slider Cradle
Turning Bars Over
1. Loosen cap screw (C) and remove wing weldments.
2. Remove cap screws and nuts (A) on both wing weldments.
3. Remove bars (B) and turn upside down.
4. Reinstall bars and tighten all bolts.
WARNING
!
Failure to remove tools from installation area and conveyor
belt before turning on energy source can cause serious injury
to personnel and damage to belt.
5. Remove all tools from maintenance area.
DANGER
!
Do not touch or go near conveyor belt or conveyor accessories
when conveyor belt is running. Body or clothing can get
caught and pull body into conveyor belt, causing severe injury
or death.
6. Start conveyor belt.
Weekly Maintenance
Summary of Contents for M3786
Page 14: ......