Martin Engineering M3786-03/19
9
Martin
®
Modular Slider Cradle
Troubleshooting/Installation Checklist
Troubleshooting
If you are experiencing problems with Martin
®
Modular Slider Cradle, see
below.
Installation
Checklist
If after taking the corrective actions suggested under “Troubleshooting”
you are still experiencing problems, check for the following:
Symptom
Corrective Action
High slider bar wear
Bar is above idler height or is not parallel to belt travel. Adjust bar
height or position.
Uneven slider bar wear
Bar is not parallel to belt travel or is under impact. Inspect loading
area and divert impact or relocate cradle.
Installation Checklist
- Two cross supports are positioned according to Figure 1.
- Two support rollers are used for belts 36- through 60-in. (1000- through 1600-mm) wide
and are centered under belt.
- Slider bars contact belt and follow contour of belt.
- Ends of slider bars are 1 in. (25 mm) from face of idlers.
Troubleshooting/Installation Checklist
Summary of Contents for M3786
Page 14: ......