Martin Engineering M3786-03/19
7
Martin
®
Modular Slider Cradle
Weekly Maintenance
IMPORTANT
Read entire section before beginning work.
WARNING
!
Before servicing Slider Cradle, turn off and lock out/tag out
energy source to conveyor belt and conveyor accessories.
Adjusting for
Wear
1. Turn off and lock out/tag out energy source according to ANSI standards
(see “References”).
2. Make sure all fasteners are tight. Tighten if necessary.
3. Check slider bars for wear. If bar is not contacting belt, but has more than
1/16 in. (2 mm) of material left at slider bar, adjust bar height as follows:
a. Loosen nuts (A and B).
b. Move bar and attaching components until proper bar-to-belt contact
occurs.
c. Tighten nuts.
Weekly Maintenance
Summary of Contents for M3786
Page 14: ......