Martin M3786, Operator'S Manual

Page: 17 / 22

Martin Engineering M3786-03/19 13 Martin
®
Modular Slider Cradle
NS = Not Shown
*XX indicates belt width.
**First XX indicates belt width. Next XX indicates trough angle.
Figure 2. Martin
®
Modular Slider Cradle, P/N UCGS-XXXXXXXXAS
Item Description Part No. Qty
1 Cross Support Assembly UC-001500-XX* 1
2 Formed “C” Channel UC-001501-XX* 1
3 Center Roll Weldment UC-002010-XX* 1
4 Wing Weldment UC-002020-XXXX** 2
5 Locking Weldment UC-002540-XX* 1
6 Washer Flat 5/8 Narrow 16814 1
7 Draw Bolt 5/8-11NC SS UC-001504 1
8 Nut Elastic Lock 5/8-11NC ZP 22624 1
9 Formed Angle UC-002041-0X 4
10 Bar Holder Weldment UC-002050-0X 4
11 UHMW Bar Table II Table II
12 Spacer UC-002043 Table II
13 Tie Tab UC-002001 Table II
14 Roll TMIRD6-XXSP* Table II
15 Screw HHC 3/8-16NC ZP UC-002060-0X 4
16 Washer Flat 1/2 Narrow ZP 31010 Table II
17 Washer Split Lock 1/2 ZP 17329 Table II
18 Nut Hex 1/2-13NC Gr 5 ZP 36739 Table II
19 Screw HHC 1/2–13NC x 1-1/2 Gr 5 ZP 11763 8
20 Washer Flat 3/8 Wide ZP 18007 8
21 Washer Split Lock 3/8 ZP 11978 4
22 Nut Hex 3/8-16NC Gr 5 ZP 11770 4
23 Screw Tapping HWH 1/4-20NC x 3/8 ZP 38608 Table II
24 (NS) Hardware Kit UC-002070-S 1
25 (NS) Label Kit 34769 1
26 (NS) Operator’s Manual M3786 1
27 (NS) Spacer Table II Table II
28 (NS) UCGS SS Bar Support Bracket Table II Table II
Part Numbers