Transporteur Rack
Weight Limit
Do not exceed 20 kg (44 lb).
Safety
Do not move your GSD by the Transporteur Rack.
Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured.
Installation
Tools required (not included)
5 mm Allen Wrench
10 mm Open-End Wrench
1. Fit the Rack onto mount and insert Bolts, Washers, and Nuts, as shown above.
2. Tighten Bolts to a torque of 10 Nm – 12 Nm.
3. Secure the Cables with the Cable Strap.
Check that cables and cargo do not interfere with steering and/or braking
before riding.
Make sure the Cable Strap location does not interfere with Physis
handlepost operation.
What’s Included
1.
Transporteur Rack
2.
Bolt Set x 2
M6 x 50 mm
M6 Washer
M6 Nut
3.
SideStrap x 1
4.
Cable Strap x 1
1
2
3
4
5 mm
10 mm
ternbicycles.com
