Status messages
23
Status messages
message
reason
The heaters are Off, the unit is shut down.
The unit is heating up to operating temperature.
The heater is at operating temperature, but Haze is not
turned on (RUN set to STBY or HAZE set to 0%).
The heater is at operating temperature and the unit is under
DMX control.
The heater is in run mode and is producing haze.
The machine has detected an error with its calibration
settings and will not operate. Call Martin Service and
Support.
The machine has detected an error in the temperature
sensor and will not operate. Call Martin Service and
Support.
The machine is running a cleaning cycle which lasts 45
seconds (number may be 45 to 0)
R e s e t t i n g t h e m a c h i n e a f t e r f l u i d o u t
If the machine runs out of fluid simply refill the fluid container and follow the
priming instructions on page 14.
