Basic service
21
F u s e r e p l a c e m e n t
The two fuses for the machine are located on the electronics board inside the
unit.
DANGER! Disconnect the power supply before removing any covers. Live parts
inside!
To replace a fuse, disconnect the power cord from the supply, unscrew the
screws holding the top cover of the unit and remove the cover. The electronics
board is located in the compartment under the display.
Remove the spent fuse and replace with one of exactly the same size and rating.
The fuse type is indicated below. Contact Martin Service and Support if the fuse
blows repeatedly.
F1
120V = 10AT
230V = 6.3AT
F2
120V = 3.15AT
230V = 3.15AT
