8
Cyclo 04 DMX user manual
EnstoNet Installation System socket and out (to the next fixture) via the
male socket at the other end of the fixture.
Power cabling and connectors are not supplied with the Cyclo 04 DMX but
cabling and connectors in a range of configurations can be ordered from
your local Ensto distributor, or the following connectors and cables are
available from your Martin dealer:
ENSTO 3 pole 16A/250V male connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 05347202
ENSTO 3 pole 16A/250V female connector . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 05327202
ENSTO male/female cable (15 cm/5.9in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 11501019
Be sure to refer and comply with local standards. Some common AC cable
configurations are:
Cyclo 04 DMX fixtures can be powered in series with other Cyclo 04 DMX
fixtures of the same type. When doing this be sure to use a power cable that
is able to handle the 0.56A that is drawn by each fixture in the series.
Data linking multiple fixtures
You need to create a data link if you are going to be:
• Operating multiple Cyclo 04 DMXs in a synchronous way using the stand-
alone functionality
• Controlling more than one fixture via a DMX control device
Wire (EU)
Wire (US)
Pin
Marking
brown
black
live “L”
or
“1”
blue
white
neutral
“N”
yellow/green
green
ground
Summary of Contents for CYCLO 04 DMX
Page 1: ...m a r ti na r c h i t e c t u r a l Cyclo 04 DMX user manual...
Page 23: ......