© Martin Engineering GmbH
34
M3289UK-01/17
Maintenance
6.3.2
Replace cleaning elements
1.
Disconnect the power cable from the angled gearbox motor
(if necessary).
2.
Pull the angled gearbox motor (1, Fig. 15) off the shaft of the
secondary cleaner and lay it on a level, firm surface or secure
appropriately.
CAUTION! RISK OF INJURY!
The angled gearbox motor can be turned out of the way during the
dismantling.
Secure angled gearbox motor before dismantling.
NOTE
The old and new cleaning elements should always be the same
(material and pattern type).
NOTE
Make sure that the electrical power cable does not remain hanging
and is not subjected to any mechanical strain. Secure
appropriately if the power cable has not been removed.
