•
Locate the connector labeled
“
EXT
-
VLV
”
and connect it to the extraction side of the direc-
tional valve as shown in the picture. Secure the connector to the valve using the center bolt
provided in the small plastic bag attached to the planter harness .
Continue with the power harness.
•
Locate the connector labeled
“
POWER
”
and connect it to its mated connector on the planters
harness.
•
Connect the two ring wire
-
ends (Labeled RT
-
1 and RT
-
2) of the power harness to 12 Volts
power supply on your tractor. Make sure that the red wire (RT
-
1) is connected to switch
-
on
positive and the black wire (RT
-
2) is connected to negative. Incorrect connecting of the
power wires can damage the electronics components.
•
Close the box cover.
•
Secure the harnesses, converter box, and ORIOLE controller box to the planter using the
provided zip ties.
Directional valve retraction
connector
Directional valve extraction
connector
Tee connection fitting
Directional valve
•
If you ordered the double valve plumbing box with additional airbag valve(SC
-
ASSEMBLY
-
2),
locate the connector labeled
“
PRES
-
REG BANK
-
2
”
and connect it to the bank
-
2 pressure reg-
ulator in the box. The bank
-
2 pressure regulator is the one closer to the air inlets/outlets
and doesn
’
t have a tee connection fitting. Secure the connector to the valve using the center
bolt provided in the small plastic bag attached to the planter harness .
•
Locate the connector labeled
“
RET
-
VLV
”
and connect it to retraction side of the directional
valve as shown in the picture. Secure the connector to the valve using the center bolt pro-
vided in the small plastic bag attached to the planter harness.
13
