Martin Professional Inground 200, Installation Manual

Page: 5 / 20

Introduction 5
1. Introduction
Thank you for selecting the Martin Inground 200, a 150 watt uplight designed for exterior burial
installation.
This Installation Guide describes how to:
• prepare groundwork (installation well, etc.) before installation
• connect cables
• adjust the beam angle and have the Inground 200 ready for operation
For details of operating the Inground 200, please refer to the User Manual shipped with the product.
The most recent versions of the User Manual and this Installation Guide are also available in the
Support area of the Martin Architectural website at http://www.martin-architectural.com
Included items
The Inground 200 is supplied with the following items:
• Philips CDM-SA/T 150W/942 lamp
• 4 blanking plugs for cable entry holes
• 2 stainless steel IP68 cable glands for AC power cable entry
(M25 x 1.5; designed for cable Ø13-17mm / Ø 0.51-0.67 in.)
• Installation guide
• User manual
Inground 200 6 Color and Full Spectrum CMY models are also supplied with the following items:
• 2 stainless steel IP68 cable glands for control cable entry
(M16 x 1.5; designed for cable Ø 5-9mm / Ø 0.2-0.35 in.)
2. Safety precautions
Warning! This product is not for household use. Installation of the Inground 200 may only be
carried out by qualified professionals.
This product presents risks of lethal or severe injury due to fire and heat, electric shock and lamp
explosion.
Read this guide before installing the fixture. Follow all safety precautions listed in this guide.
Observe all warnings in this guide and on the fixture.
Before attempting to operate the Inground 200, refer to the User Manual supplied with the product.
The User Manual is also available in the Support area of the Martin Architectural website at
http://www.martin-architectural.com
If you have questions about how to install the fixture safely, please contact your Martin Architectural
dealer or call the Martin 24-hour service hotline on +45 70 200 201.
Eliminating fire risk
The Inground 200 must be installed:
• Outdoors or in a well-ventilated area.