5 – Set Up VMS for Soft On-Screen PTZ Control
Page 12 of 28
5-6 Enter
IP Address 192.168.1.99
and the subnet mask will populate automatically.
Click OK, and OK again to close.
5-7
Make sure your PTZ Camera(s) are powered on and connected.
5-8
Launch the VMS Software by double left clicking the VMS Icon on the desktop.
5-9
You will see the Video Management System Login Screen as shown below.
The Default Login Credentials are:
User ID:
admin
Password:
1234
If you choose to check the box Automatic Login you will not be asked for a password
on launch, but you will need the password to exit VMS.
