6
Top and Front Panel Features
Panel Power Button
Use the panel power button to toggle between ON and
STANDBY modes. In both the STANDBY and the ON state, the
LED on the button will illuminate bright green. This indicates
that MAIN power is applied to the unit.
Input Select Buttons
Use the VIDEO, YPbPr, S1 and S2 buttons to select the
corresponding analog or digital input. Video standards
(NTSC/PAL, etc.) are automatically detected. S1 and S2
buttons select inputs connected to
Optional Input Modules
(located in Slot-1 or Slot-2).
User-Definable Function Buttons
Four user-definable function buttons can be used for direct
access to various settings. Functions are assigned using the on-
screen menu.
Menu Navigation Buttons
Use the Menu,
▲
,
▼
, and
Select
buttons to display and
navigate the on-screen menu
(
See Main Menu and
Navigation
)
.
Image Adjustment Knobs
Use the image adjustment knobs to adjust color brightness,
color-saturation, tint, and contrast of the image. The status of
each image adjustment parameter is shown on the bottom left
of the screen, with values ranging from 0 to 100. Default value
is 50.
LED Tally
Three LED tally lights (yellow, red, green) are available above
the screen.
23
Specifications
■
PANEL
Screen Size
15.6” Diagonal
Display Area (h x v)
344.16 x 193.59 mm
Pixels
1920 x RGB x 1080
Viewing Angle
(h x v) 160° x 145°
Brightness
600 cd/m2
Contrast Ratio
800:1
■
VIDEO INPUT/OUTPUT
Video Input / Output (Composite)
Supports SMPTE 170M, NTSC/PAL
YP
B
P
R
Input / Output (Component)
Supports SMPTE 260M, 274M, 296M
■
CONNECTORS
Video Input
Video (Composite)
1 x BNC Female (75 Ω)
YP
B
P
R
(Component)
3 x BNC Female (75 Ω)
Video Output (Active Loop-Through)
Video (Composite)
1 x BNC Female (75 Ω)
YP
B
P
R
(Component)
3 x BNC Female (75 Ω)
S1, S2 (Module Slots)
For Marshall I/O Modules Only
Cold-Swap – remove power from unit before
Inserting or removing Modules.
Power Input
4-Pin XLR Connector
Tally Hardware Interface
HD-15 Female
CN-1 – Programming Port*
Factory / Upgrade Use Only
■
TALLY Hardware Interface (HD-15)
Activation requires contact closure of pin to ground
on the HD-15 connector:
G
R
Y
1
2
3
GND: 4,5
■
ELECTRICAL
Power Consumption
N/A
Voltage Requirement
12 VDC
■
MECHANICAL
Weight (with rack ears): 7.1 lbs
Operating Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature
-4°F to120°F (-20°C to
50°C)
See
Dimensions
section for exact specifications.
Warning:
Please use only the square type VESA
mount (which fits inside the VESA Screw Length
WARNING silkscreen) with the 75mm hole pattern in
order to avoid obstructing Module Slot 2.
