background image

4

Safety 

Precautions

Page 4


In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning.

 

Your air conditioner should be used in such a way that it is protected from moisture. 
e.g. condensation, splashed water, etc. Do not place or store your air conditioner where it can

 

fall or be pulled into water or any other liquid. Unplug immediately if it occurs.
All wiring must be performed strictly in accordance with the wiring diagram located inside of

 

the unit.
The unit's circuit board(PCB) is designed with a fuse to provide overcurrent protection. The

 

specifications of the fuse are printed on the circuit board, such as: T 3.15A/250V, etc.








 CAUTION

This appliance can be used by children aged from 8 years and above and person with reduced 
physical, sensory or mental capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance 
shall not be made by children without supervision. (be applicable for the European Countries)

 

This appliance is not intended for use by persons (including childern) with reduced physical, 
sensory or mental capabilities or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. Children should be supervised to ensure that they do not play with the appliance. 
Children must be supervised around the unit at all times.(be applicable for other countries 
except the European Countries )
If the supply 

power  

cord is damaged, it must be replaced by the manufacturer,its service agent 

or similarly qualified persons in order to avoid a hazard.
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

 

Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has 
been dropped or damaged.
Do not run 

power  

cord under carpeting. Do not cover 

power  

cord with throw rugs, runners, or 

similar coverings. Do not route 

power  

cord under furniture or appliances. Arrange 

power  

cord 

away from traffic area and where it will not be tripped over.
Do not operate unit with a damaged 

power  

cord, plug, power fuse or circuit breaker. Discard 

unit or return to an authorized service facility for examination and/or repair. 
To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

 

The appliance shall be installed in accordance with national wiring regulations.
Contact the 

authorized

 service technician for repair or maintenance of this unit.

Contact the 

authorized

 installer for installation of this unit.

Do not cover or obstruct the inlet or outlet grilles.
Do not use this product for functions other than those described in this instruction manual.

 

Before cleaning, turn off the power and unplug the unit.
Disconnect the power if strange sounds, smell, or smoke comes from it.
Do not press the buttons on the control panel with anything other than your fingers.
Do not operate or stop the unit by inserting or pulling out the power cord plug.

Summary of Contents for Comfort-Aire PS-121C


























Reviews: