17
Page 17
Installation
Instructions
Or
Or
MODEL A
MODEL B
5. Insert the window slider adaptor into the hole of the window slider.
Type 2: Wall Installation(For some models)
NOTE: To ensure proper function, DO NOT overextend
around the air outlet of the exhaust hose (in the range
or bend the hose. Make sure that there is no obstacle
of
20 in.
) in order to the exhaust system works
properly. All the illustrations in this manual are for explanation purpose only. Your air conditioner may be
slightly different. The actual shape shall prevail.
1.
Cut a 4.9inch hole into the wall for the Wall Exhaust
Adapter
B.
2.
Secure the Wall Exhaust
Adapter
B to the wall using the four Anchors and Screws provided in the kit.
3.
Connect the Exhaust Hose Assembly(with Wall Exhaust
Adapter
A) to the Wall Exhaust
Adapter
B.
NOTE: Cover the hole using the
adaptor cap when not in use.
max 120cm or 47 inch
min 30cm or 12 inch
Expansion anchor
position
Adaptor cap
Wall Exhaust
Adaptor B
VENT CONTROL feature(for MODEL B)
The Vent Control is located at the back of the air
conditioner. The OPEN position removes stale air from
the room and exhausts it to the outside. Fresh air is
drawn in through normal passages in the home. When
not need to circulate the room air, set Vent Control to
CLOSE position. This function is only applicable for
MODEL B.
CLOSE
OPEN