background image

6

Safety 

Precautions

Page 6 

Compliance with national gas regulations shall be observed.
Keep ventilation openings clear of obstruction.
The appliance shall be stored so as to prevent mechanical damage from occurring.
A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds 
to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current 
valid certificate from an industry-accredited assessment authority, which 

authorizes

 their competence 

to handle refrigerants safely in accordance with an industry 

recognized

 assessment specification.

 

Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and 
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of 
the person competent in the use of flammable refrigerants.

Please follow the instruction

s

 carefully to handle, install, clear, 

 and 

service the air conditioner to avoid 

any damage or hazard. 

 

Flammable Refrigerant R32 is used within 

the 

air conditioner. When 

maintaining or disposing 

of 

the air conditioner, the refrigerant (R32) shall be recovered properly, shall 

not discharge 

in

to 

the 

air directly.

No open fire or device like switch which may generate 

spark/arcing shall be around 

the 

air 

conditioner to avoid causing ignition of the flammable refrigerant used. 
Please follow the instruction

s

 carefully to store or maintain the air conditioner to prevent mechanical 

damage from occurring.
Flammable refrigerant -R32 is used in 

the 

air conditioner. Please follow the instruction

s

 carefully to 

avoid any hazard.

 

For speci

fi

c information on the type of gas and the amount,

 

please 

see

 the relevant 

label on the unit itself.

Summary of Contents for Comfort-Aire PS-121C


























Reviews: