SOLO-NX
INSTALLATION MANUAL
Page 4
1
FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete
user guide for further information.
SWITCH ON SAFELY
Do not switch the unit on when use of wireless phone is prohibited or when it may cause
interference or danger.
INTERFERENCE
All wireless phones and units may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the unit off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the unit at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the unit where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do not touch the
antenna unnecessarily.
2
INTRODUCTION
SOLO-NX is a simple GSM intercom communication system that is designed to ensure low-cost,
reliable and single box solution for intercom application. It is designed for unlimited range, wire
free GSM intercom and Caller ID recognition – CLIP support.
In addition SOLO-NX supports alarm detection, stay-alive messages, credit detection etc…
3
FEATURES AND APPLICATIONS
Features:
Built-in 4 band GSM module
Up-to 4 buttons call support
2 alarm inputs, 2 additional on extension connector
2 outputs (relay supported)
Up to 100 telephone numbers for CLIP support
Programming by USB cable
Programming by SMS commands
Anti-tampering input
Applications:
Single box, wire free intercom solution
Remote gate opener (Caller ID recognition - CLIP)
Simple alarm support
