MARS COMMERCE SOLO-NX, Instruction Manual

Page: 34 / 35

SOLO-NX
INSTALLATION MANUAL
Page 34
13 PARAMETERS PRINT-OUT COMMANDS
SOLO-NX PROGRAMMING TABLE
Name Short Description
PALL
Prints all parameters available on SOLO-NX.
PSW
Prints SW version of SOLO-NX.
PSQ Prints GSM network signal quality of SOLO-NX.
PTN Prints TNx numbers.
PLN Prints LNx links.
PIN Prints INx parameters.
PID Prints IDx parameters.
POD Prints ODx parameters.
PDD Prints DDx parameters
PSL Prints SL parameter.
POS Prints OSx parameters.
P# Prints #x parameters.
PPA Prints various setup parameters.
PCLP Prints CLIP parameters.
PLOG Prints log of the SOLO-NX.
PCREF Prints credit pars parameters.
PCN Prints credit request numbers.
PCC1 Prints credit for SOLO-NX (universal request).
PCC2 Prints credit for SOLO-NX. (TIM Italy).
PCC3 Prints credit for SOLO-NX. (VODAFONE Italy).
PWG Prints Wiegand parameters.
INS Prints status of the inputs.
PORC Prints (controls) the status of outputs.
PDEA Prints intercom button 1 parameters.
PDEB Prints intercom button 2 parameters.
PDEC Prints intercom button 3 parameters.
PDED Prints intercom button 4 parameters.
Table 25: SOLO-NX parameters print out commands.