SOLO-NX
INSTALLATION MANUAL
Page 14
IMPORTANT
Before any SL number is programmed the SOLO-NX can accept ALL CALLS.
Remote SMS programming and remote controlling is possible from any phone!
Name / value
Comment
SL = 0
All calls and SMS are accepted
SL = 1
Only number stored under parameter TN1 has access to unit
SL = 2
Numbers stored under parameters TN1 to TN2 have access to unit
SL = 3
Numbers stored under parameters TN1 to TN3 have access to unit
SL = 4
Numbers stored under parameters TN1 to TN4 have access to unit
SL = 5
Numbers stored under parameters TN1 to TN5 have access to unit
Table 8: SL parameter
Example:
Direct programming on the SIM card
SOLO-NX PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
SL
3
Numbers stored under parameters TN1 to TN3 have access to unit
Table 9: SL example
Remote programming by SMS
;SL=3;
9.4
PREPAID CARD CREDIT AND VALIDITY INFORMATION
SOLO-NX can be used with prepaid SIM cards and its limitations. To be able to overcome this
limitation of the prepaid SIM cards, SOLO-NX offers the possibility of automatic checking
mechanism for credit and time expiration.
NOTE
SOLO-NX automatically sends warning SMS when the credit reaches low level
defined by LCV parameter or SIM card validity is near to expiration.
NOTE
For support of different GSM providers contact support.
