SOLO-NX
INSTALLATION MANUAL
Page 16
Example:
Direct programming on the SIM card
SOLO-NX PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
CC1
*448#
Simobil
CC2
4916
TIM Italy
CC3
404
Vodafone Italy
LCV
4
Low credit message will be send bellow 4
Table 11: Credit example
Remote programming by SMS
;CC1=*448#;CC2=4916;CC3=404;LCV=4;
9.5
SET-UP PARAMETERS
Different parameters are used to support versatile functionality of SOLO-NX.
9.5.1
HTN parameter
Hidden telephone number is a parameter used in order to conceal the telephone number of the
SOLO-NX device. The default value is set to “1” which means that the number is displayed.
9.5.2
ESC parameter
Parameter is used to define the input used to cancle the outgoing call from the SOLO-NX device.
9.5.3
UDC parameter
Parameter is used to synchronise SOLO-NX clock to GSM network clock. User must enter here the
number of the SOLO-NX SIM card (Telephone number of SOLO-NX device).
9.5.4
RAN parameter
Parameter is used to provide support for auto-answer options for SOLO-NX device. The number
defines the numbers of rings needed for SOLO-NX device to answer the incoming call. The
incoming number must be on the TN list for SOLO-NX device to answer.
