Marlec Eng Co Ltd Installation Instructions
__________________________________________________________________________________________
Document No: SM124 Issue D 30.01.07
8
ASSEMBLY AND INSTALLATION OF THE WINDCHARGER
Blade Assembly (Fig. 4)
1. Place the generator assembly on a flat surface hub-side down.
2. Position blade as shown.
The blades will only fit one way round.
Insert the protrusion at the trailing edge of the blade root fixing first into
socket to align with the corresponding recess in the blade socket. The
blade can then be easily inserted with a lever action. Gentle assistance with
a soft faced mallet may be required.
3.
Four screws are required for each blade.
First secure each blade with
two of the special self-tapping screws provided.
4. Fit the remaining 2 blade screws from the front of the generator hub.
5. Check tightness of all screws. (Do not over-tighten).
NB. IT IS IMPORTANT THAT 4 SCREWS PER BLADE ARE
FITTED.
Fig.4
