manualshive.com logo in svg

Markes International Unity 2, User Manual

Share
Download
Markes International Unity 2 User Manual Download Page 47

 

 

 

QUI-1057

Page 47

Markes International Ltd 

T:

 +44 (0)1443 230935   

F:

 +44 (0)1443 231531   

E:

 [email protected] 

 

www.markes.com 

 

4.

 

Select Uninstall/Change Program and follow the on screen prompts (when asked to remove shared 
files click yes). The Markes TD software should now be uninstalled. 

3.7.2

 

Windows Vista 

1.

 

Click on the start button and select control panel. 

2.

 

In the control panel select Programs and Features. 

3.

 

Scroll down the list presented and select Markes TD 5.1.0 

4.

 

Right click and select Uninstall/Change Program and follow the on screen prompts (when asked to 
remove shared files click yes). The Markes TD software should now be uninstalled. 

3.7.3

 

Windows XP 

1.

 

Click on the Start button and select Control Panel. 

2.

 

In the Control Panel select Add/Remove Programs. 

3.

 

Scroll down the list presented and select Markes TD 5.1.0 

4.

 

Click on Add/Remove and follow the on screen prompts (when asked to remove shared files click 
yes). The Markes TD software should now be uninstalled. 

 
 

Summary of Contents for Unity 2




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands