Maritime Geothermal ATF-45, Installation And Service Manual

Page: 41 / 110

1-Jun-2018 Page 41 002000MAN-01
View—Digital Inputs
: Shows the digital inputs and their in-
dividual status (ON/OFF). They may be individually controlled
when in Manual Override Mode in order to facilitate trouble
shooting.
View—Digital Outputs
: Shows the digital outputs and their
individual status (ON/OFF). They may be individually controlled
when in Manual Override Mode in order to facilitate trouble
shooting.
View—Analog Inputs
: Shows the Analog inputs and their individual settings and values.
Click on the
EDIT
button to modify the blue boxes (button will now say
SAVE
). For each channel a name may be selected (up to 16
characters), and the multiplier and Offset values may be set to accommodate the connected sensor scaling. Signals may be 4-20mA
(channel jumper on board ON) or 0-10VDC (channel jumper on board OFF). A variety of units are also available for selection of com-
mon measurement types. Click on
SAVE
to save the changes. Values are kept even when power is removed from the unit.
View—PWM Channels
: Shows the PWM channels and their individual status (0-100%). They may be individually controlled
when in Manual Override Mode in order to facilitate trouble shooting.