15
Remote Brightness Interface Male Connector (REMOTE BRIGHTNESS)
Connect the remote brightness Cable (not provided) to the DB9 male input
connector on the back of the unit. The brightness of the LCD Display can be
controlled remotely through this interface connector using two push button switches
for brightness up and brightness down. Also, the remote brightness potentiometer
(10K pot) can be connected through this interface connector.
Programming / Field Service Interface (PROG)
This interface is only for field service and manufacturing use.
Earth Ground
An M4 screw is provided for earth ground. It should be connected using a braid or
wire.
CABLE TIEDOWNS
After the I/O cables are attached to the input connector, secure them with a cable tie
(provided) to the appropriate tie-down.
