____________________________________________________________
CLMD16 Configuration Guide Rev.1.1 5
“Input Signal Selection”
There is a list of input signals available to be used to activate the various “Switching Elements”
these “Input Signals” consist of the following:
Signal Name
Description
None Selected
This
connects the specified input to a constant Logic ‘0’ value
Binary Event 1 through 12 Low
The signal on binary event 1 through 12 is in the Low voltage
range
Binary Event 1 through 12 Float
The signal on binary event 1 through 12 is in the Float voltage
range
Binary Event 1 through 12 High
The signal on binary event for the numbered channel is in the
High voltage range
Network Input 1 through 16
The state of the signal on Network Input for the numbered
channel
Logic Output 1 through 48
The state of the output of Logic Element for the numbered
channel
Latch Output 1 through 16
The state of the output of Latch Element for the numbered
channel
Toggle Output 1 through 16
The state of the output of Toggle Element for the numbered
channel
Timer Output 1 through 16
The state of the output of Delay Timer Element for the
numbered channel
Flash Output 1 through 16
The state of the output of Flash Element for the numbered
channel
Counter Active 1 through 16
The state of the output of Counter Element 1 through 16
Over Current Fault Ch 1 through 16
An Over Current Fault has been detected on Channel 1 through
16
Ch 1 through 16 Tripped
The circuit breaker for the numbered channel is tripped
Ch 1 through 16 Thermal Limit Hit
The circuit breaker for the numbered channel has reached its
thermal limit
Discrete I/O 1 through 32
The discrete state I/O of the signal the numbered channel
Breaker On 1 through 16
The state of an Output Channel for the numbered channel
Summary of Contents for MPOWER CLMD16
Page 4: ...This Page Intentionally Left Blank...
Page 58: ......
