Maretron MPOWER CLMD16, Configuration Manual

Page: 19 / 58

____________________________________________________________
CLMD16 Configuration Guide Rev.1.1 15
Configuration of Common Circuit Types
Applying a Physical Momentary or Sustained Contact Input Signal
to Switch a Load
Applying a single momentary or sustained contact input signal to CLMD16 in order for the ECB
output to replicate the input signal
of “On” or “Off” is a one-step procedure. See following
process to apply inputs to the CLMD16 ECBs.
Step 1:
Apply
“Input signal” to desired breaker / load output
control
or “ECB”. In this example the Input
Signal is “Binary Event Low”