manualshive.com logo in svg

Maretron MPOWER CLMD16, Configuration Manual

Share
Download
Maretron MPOWER CLMD16 Configuration Manual Download Page 5

____________________________________________________________ 

 

                                                    CLMD16 Configuration Guide Rev.1.1                                            1          

Requirements 

 

Configuration Tools 

 

This document outlines how to configure the CLMD16 using Maretron’s N2KAnalyzer® V3 
software in conjunction with either a Maretron USB100 or a Maretron IPG100 connected to an 
active NMEA2000® network. For information 

on how to use Maretron’s N2KAnalyzer® V3 

software or to download the latest version of 

Maretron’s N2KAnalyzer® V3 software please 

visit: 

https://www.maretron.com/products/N2KAnalyzer.php

 

For N2KAnalyzer® V3 software to configure a CLMD16 unit the CLMD16 unit must be 
powered and connected to an active NMEA2000® network.  

CLMD16 Software Update 

 

Before attempting to configure CLMD16, always ensure that you are using the latest version of 
Maretron N2KAnalyzer® V3 and install the latest software / firmware to your CLMD16 unit 
using N2KAnalyzer® V3. To update software for CLM

D16 first compare “Current Software” vs 

“Available Software”, right click CLMD16 inside N2KAnalyzer® and click on “Update Selected 
Device’s Software”. A Dialog Box will appear showing the software update progress.  

 

 

Summary of Contents for MPOWER CLMD16



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands