DSM800 User’s Manual
Page 4
Revision 1.0
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot
holes and tightening them (see Figure 2
)
.
Figure 2 – Wall Mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the four screw
holes on the rear panel of the DSM800 and tighten until the screw shank is secured against
the rear panel (Figure 3).
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor downwards until the
monitor rests securely in the slotted holes (Figure 3). Ensure that all four of the mounting
screws fit snugly into their respective slotted holes.
Figure 3 – Chassis Support Screws
