®
®
Revision 1.0
Page 17
3 Operating the DSM800
3.1
Turning the DSM800 On
To turn on the DSM800 when the front panel LED is illuminated yellow, press the power rocker
switch, located underneath the DSM800 on the right hand side of the unit, behind the LCD screen. To
turn on the DSM800 when the front panel LED is not illuminated, turn on the power from the external
breaker or switch.
3.2
Turning the DSM800 Off
To turn the DSM800 off, use the “Shutdown” administrative tab of the N2KView
®
software.
Alternatively, you can power down the unit by pressing the DSM800’s power rocker switch. Lastly,
you can power down the unit by turning of the power source with an external breaker or external
switch.
3.3
Using the DSM800
The DSM800 runs a fully functional version of the Maretron N2KView
®
software. Please refer to the
N2KView
®
User’s Manual
, included with the DSM800, for detailed operating instructions.
