®
®
Figure 13 – Configuration Dialog
c.
Uncheck the “
Use DHCP
” box to indicate that your LAN does not use DHCP.
d.
In the “
IP Address
” field, enter the IP address you wish to assign to the DSM800.
e.
In the “
Netmask”
field, enter the netmask value used on your LAN (in most cases, this value
will be “255.255.255.0”).
f.
In the “
Gateway”
field, enter the IP address of the default gateway of your LAN.
g.
In the “
Name Server”
field, enter the IP address of a DNS (Dynamic Name Service) Server
used on your LAN.
h.
Click the “
Update
” button to make these changes permanent. The screen will go blank for a
few seconds while this is being done.
Revision 1.0
Page 13
