DSM800 User’s Manual
Page 6
Revision 1.0
Figure 5 – DSM800 Cutout Dimensions (units in mm)
Step 3:
Slide the DSM800 through the hole until the aluminum frame is flush against the panel.
Step 4:
Insert the panel mounting clamps into the pre-formed holes along the edges of the chassis,
behind the aluminum frame (6 clamps come with the optional panel mount kit, 4 clamps are
used, and two are extras).
Step 5:
Tighten the screws that pass through the panel mounting clamps until the plastic caps at the
front of all the screws are firmly secured to the panel (Figure 6).
