MPD-3 Series Installation
Page 28
MDE-3883 TRIND Retrofit Kits C00011-005
• 10/00
PRELIMINARY
FCC 11/30
5
For units with Screened Image Display (SIDs) only, do the following:
Note: If these directions are not followed printed circuit boards will be damaged.
• From ‘B’ side of unit, install screw up through hole under card cage. Align
screw with mounting hole on card cage, but do not fasten.
• Tilt card cage away from screw, and secure screw to shelf by installing two
nuts under card cage.
• Let card cage rest on nuts with screw protruding up through hole in card cage.
Note: This will result in card cage tilting down toward the ‘A’ side.
6
For all units, from ‘A’ side of unit, fasten card cage to shelf using 6-32 x 3/8" screw
(Q12083-13) supplied with kit.
