3
The information provided in this manual is intended to assist in the installation and maintenance of the Marco FRIIA System. Please
read the instructions carefully to prevent accidents and ensure an efficient installation. This manual is not a substitute for any safety
instructions or technical data affixed to the machine or its packaging. All information in this manual is current at the time of publication
and is subject to change without notice. Only technicians or service providers authorised by Marco should carry out installation and
maintenance of these machines. Marco accepts no responsibility for any damage or injury caused by incorrect or unreasonable
installation and operation. Do not allow anyone to operate the equipment unless suitably trained. Keep the equipment in good
working order and do not allow any modifications unless authorised by the manufacturer.
•
This document shall be applied to equipment intended for the EC market only.
Introduction
A.
Model Number and name.
B.
Product serial code (mmyyxxxxxx)
C.
Rated Voltage.
D.
Rated Power.
E.
Contact details.
F.
WEEE Logo
This logo indicates that the product must not be disposed
of as household waste. To help prevent possible harm to
human health and/or the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For further information on how to dis
-
pose of this product correctly, contact product supplier,
or the local authority responsible for waste disposal in
your area.
G.
Regulatory standard logo
This equipment has been designed and tested to comply
with all applicable regulatory standards set by
international, independent and government authorities.
A
B
C
D
E
G
F
RATING PLATE
FRIIA Chiller
120W
100-900 kPa
1000860
230 V.a.c.
50Hz
2 amps
