ME6 IR Dome Configuration Guide
18
Upgrading the ME6 IR Dome
•
Click
MANUAL
to manually adjusting focus by clicking the buttons in the
FOCUS
section
•
Click
ZM TRIG
, to automatically adjust focus every time the zoom level is changed.
•
Click
PUSH AF
button to launch the automatic focus setting. After a few moments,
the camera automatically adjusts focus on the image.
6 To manually refine the FOCUS level on the image, select the check box and manually
select the number of steps for each click from the
Steps
list.
7 To reset the focus settings to factory default, click the
RESET
button.
Upgrading the ME6 IR Dome
You can upgrade the software for the ME6 IR Dome by accessing the
System
Configuration
page.
Notes:
•
You can download software upgrades for the ME6 IR Dome from the March Networks
Partner Portal. If you do not have access to the Partner Portal, contact your March
Networks representative.
•
It is recommended that you back up the configuration of your camera before the
upgrade. To back up the configuration, access the
System Settings
page, click the
Maintenance
sub-menu, and then click
Export
. For more information, see “Exporting
and Importing Configuration Settings” on page 41.
To upgrade your ME6 IR Dome using the Web Setup interface
1 Download the latest upgrade for your device from the March Networks Partner Portal,
and unzip the file in a directory of your choice.
Note:
You can discard the .xml file: that file is required only for the firmware upgrade
procedure using Command Enterprise Server and the Discovery Browser (v.4.4 and
higher).
2 Access the Web Setup interface.
3 On the main page, under
System
click
Settings
.
The
System Settings
page appears.
4 To view the current firmware installed, click the
Software Version
tile.
