Marantz DV110, User Manual

Page: 36 / 41

31
ENGLISH
7. Press the ENTER button
@4
to enter the selection.
Or push the ENTER button
,
.
The time set on the display now flashes. (Second setting)
8. Finally when the ENTER button
@4
on the remote control
unit is pressed, the time starts from 00 seconds.
Likewise, push the
ENTER button
,
to set the second.
• The entered time appears for 3 seconds, and then the
original display is restored.
TIMER PLAYBACK
This unit can play a disc or tuner at a specific time by setting the
playback time. The ON time and OFF time are set for timer
playback.
1. Press the TIMER button
@9
on the remote control once.
On the display, "On Time" appears first followed by the time,
and the hour flashes. (Playback ON hour setting)
↓
2. Set the playback ON hour using the Cursor (
1
/
2
) buttons
!1
on the remote control or the Cursor (
1
/
2
) buttons
.
on
the main unit.
3. Press the ENTER button
@4
to enter the selection.
Or push the ENTER button
,
.
• The setup hour appears on the display, and the minute
flashes. (Playback ON minute setting)
Blink
Blink
Blink
USING THE TIMER FUNCTIONS
This unit enables a time to be set and for a disc to be played at
this setting. The clock must always be set for the timer functions
to be valid.
Note :
These functions work only when the unit is used on its own.
The PS110's timer functions are used when the unit is
operating as part of a system with the PS110.
SETTING TIME
1. Press the TIMER button
@9
on the remote control for at least
3 seconds.
"12/24" now appears on the display, and "12" starts
flashing.
2. Select the 12-hour or 24-hour time display using the Cursor
(
1
/
2
) buttons
!1
on the remote control or the Cursor (
1
/
2
) buttons
.
on the main unit.
3. Press the ENTER button
@4
to enter the selection.
Or push the ENTER button
,
.
The time now appears on the display, and the hour flashes.
(Hour setting)
4. Set the current hour using the Cursor (
1
/
2
) buttons
!1
on
the remote control or the Cursor (
1
/
2
) buttons
.
on the
main unit.
5. Press the ENTER button
@4
to enter the selection.
Or push the ENTER button
,
.
The time now appears on the display, and the minute
flashes. (Minute setting)
6. Set the current minutes using the Cursor (
1
/
2
) buttons
!1
on the remote control or the Cursor (
1
/
2
) buttons
.
on
the main unit.
Blink
Blink