Maquet 5752 2345 Operating Instructions Manual Download Page 35

Page: 35 / 72

Operating instructions VENTA Multi Care 16_ 5752 2434

GA 5752 2434 EN 13

First-time use

Mounting accessories

4.8

Mounting accessories

4.8.1

Mount septic fluid suction pump on trolley

A trolley is available to facilitate moving the
septic fluid suction pump and installing addi-
tional accessories.

Fig. 20: Engaging castor brakes

Engaging castor brakes

⌧

Engage the brakes (2) at the castors on the
trolley (1).

Fig. 21: Attaching the septic fluid suction pump

Attach the septic fluid suction pump

⌧

Place the septic fluid suction pump (3) on the
trolley.

The septic fluid suction pump is positioned
on the locating pin (4).

⌧

Use the star knob to turn down the screw (5)
on the trolley and secure the septic fluid suc-
tion pump.

⌧

Check to ensure that the septic fluid suction
pump is firmly seated.

A R N I N G

Injury hazard!

The septic fluid suction pump and its accessories may be mounted only on the

trolley (REF 5752 2356) designed for this purpose.

Summary of Contents for 5752 2345









































































Search results

Summary of Contents for 5752 2345

Reviews:

Brands by name

Popular brands

Maquet 5752 2345, Operating Instructions Manual

Search results

Summary of Contents for 5752 2345

Reviews:

Brands by name

Popular brands