6
•
Make sure before use that blades are aligned properly.
•
Do not place the appliance on a surface while it is operating.
•
Do not use the appliance with a damaged or broken comb or with teeth missing from the blades as injury may occur.
NOTE: keep the blades oiled!
INSTRUCTIONS BEFORE FISRT USE
•
Before starting a hair cut inspect the clipper, ensure that it is free of oil between the cutting blade teeth.
•
Switch the appliance on to distribute the oil and make sure it is running smoothly. Wipe off any excess oil.
•
Before the first use of the appliance completely discharge and then charge the battery. It takes about 12 hours to charge the batteries for the first time. Each subsequent charging phase takes approx.
8 hours.
•
Usage time with fully charged batteries is approx. 60 minutes.
•
The batteries at least once in 6 months, even if the clipper is not in use.
•
To charge the battery, connect the AC adapter plug to the connector in the base, and set the machine on the stand.
•
You can use the clipper during charging. Unplug the AC adapter plug from the cradle socket and connect it directly to the clipper socket, plug the power adapter into the wall outlet, and turn on the
clipper.
OPERATION
HAIRCUT
•
Put on head 6 on the hair clipper.
•
Comb your hair with a comb in the direction of hair growth.
•
Slide the blade adjustment lever and then move the comb up or down to set the desired length setting.
•
Cutting length can be adjusted with one of the hair clipping comb attached (7).
•
Slide the on/off slide upwards to switch on the appliance.
BEARD TRIMMING
•
Put on head 8 on the hair clipper.
•
Comb your hair with a comb in the direction of hair growth.
•
Slide the on/off slide upwards to switch on the appliance.
•
Cutting length can be adjusted with one of the beard clipping comb attached (9).
•
For precision trimming of small areas use head 10
•
For shaving use head 11
•
For nose and ear hair trimming use head 12
TIPS
•
Cut the hair in a relaxed and slow manner. Use short strokes only to work gradually over the head.
•
Always take off a little at a time.
•
Cut dry hair only as it is easier to control haircut length.
•
Don’t cut fast.
•
Don’t press hard on the clipper.
CLEANING
•
Mind to clean the appliance regularly for appliance and blades long life.
•
Ensure that the appliance is switched off.