background image

Concentrator

The concentrator enables you to direct the airflow straight at the brush or 

comb with which you style your hair.

  1 

 Snap the concentrator onto the appliance.  (Fig. 4)

To disconnect the concentrator, pull it off the appliance.

Cleaning

Never rinse the appliance with water.

  1 

 Unplug the appliance.

  2 

 Remove the inlet grille to remove hairs and dust (Fig. 5).

  3 

 Clean the appliance with a dry cloth.

  4 

 Clean the attachments with a moist cloth or rinse them under the 

tap.

Storage

Do not wind the mains cord round the appliance.

  1 

 Unplug the appliance.

  2 

 Put the appliance in a safe place and let it cool down.

  3 

 You can store the appliance by hanging it from its hanging loop

Environment

Do not throw away the appliance with the normal household waste 

at the end of its life, but hand it in at an official collection point for 

recycling. By doing this, you help to preserve the environment (Fig. 6).

Guarantee & service 

If you need information or if you have a problem, please visit the Philips 

website at www.philips.com or contact the Philips Customer Care Centre 

in your country (you find its phone number in the worldwide guarantee 

leaflet). If there is no Customer Care Centre in your country, go to your 

local Philips dealer or contact the Service Department of Philips Domestic 

Appliances and Personal Care BV.

Troubleshooting 

If problems arise with your hairdryer and you cannot solve them with the 

information below, please contact the nearest Philips service centre or the 

Philips Customer Care Centre in your country.

Problem

Cause

Solution

The 

appliance 

does not 

work at all.

Perhaps the socket to 

which the appliance 

has been connected 

is not live.

Make sure the socket is live.

The appliance may 

have overheated and 

switched itself off.

Unplug the appliance and let it 

cool down for a few minutes. 

Before you switch on the 

appliance again, check the grilles 

to make sure they are not 

blocked by fluff, hair etc.

The appliance may 

not be suitable 

for the voltage to 

which it has been 

connected.

Make sure that the voltage 

indicated on the type plate of the 

appliance corresponds to the local 

mains voltage.

The mains cord of 

the appliance may be 

damaged.

If the mains cord is damaged, you 

must have it replaced by Philips, 

a service centre authorised 

by Philips or similarly qualified 

persons in order to avoid a 

hazard.

-

www.philips.com

u

4222.002.6955.1

HP4992/07 Salon ProCeramic AC

Reviews: