CK110G/CK120G/CK130G
24
Connecting the cooker to the gas installation (LPG)
Before connecting the cooker to the gas installation, make sure if the
device complies with the local conditions (type of gas and pressure). In the
case of any inconsistencies, do not connect the cooker to the installation
Connecting the cooker to a gas cylinder (LPG)
1. The cooker is provided with a termination, on which a certified
rubber duct can be slipped.
2. The duct connected to the cooker should be secured against slipping
off the termination.
3. The cooker may not be connected directly with the cylinder - always
use a regulator.
4. Each time the cooker is connected, check the tightness of the valve
on the cylinder and the connection of the regulator to the cylinder
and its operation.
Uwaga!
1. Never check the tightness using an open flame
(e.g. using matches or a candle). It poses the risk of explosion!
2. Regularly, check the condition of the hose and the tightness of the
connection, in line with the applicable regulations.
EN
